Material: Stainless Steel
Pressure Gauge 1: φ60mm-3625PSI(250Bar/25MPa)
Pressure Gauge 2: φ60mm-5800PSI (400Bar/40MPa)
Pressure Gauge 3: φ60mm-8700PSI (600Bar/60MPa)
Connect Hose Period: 1M / 39″
Pressure Gauge Screw Size: G four/1
Quick Unlock Connector: G1/8
Test coupling 1: G 1/four
Test coupling 2: Z 1/four
Test coupling 3: G 3/8
Test coupling four: G 1/8
Test coupling five: M 10*1
Test coupling 6: M 10*1.25
Test coupling 7: M 1/8
Test coupling 8: M14*1.5
Test coupling nine: 7/sixteen
Test coupling 10: nine/sixteen
3 X Pressure Gauge
10 X Couplings
1 X Fast Connector
3 X Connect Hose
1 X Aluminum Lift Case
Use and Upkeep
1) In the use of, pressure connector will have to be put in within the Check web page of pressure measurement system. The connecting thread of pressure measuring joint will have to be matched to the threads of the pressure measuring hose.
2) The pressure instrument may also be additionally measured whilst the hydraulic system is running, however user will have to ensure that the pressure point of the pressure gauge is throughout the vary.
3) The pressure instrument will have to be placed flat, the gap between pressure measuring point and the pressure instrument does no longer exceed eighty five% of hose Period.
4) In measuring pressure, the pressure measurement hose will have to be hooked up to the corresponding pressure gauge joint, after which unscrew the mud duvet of pressure measuring tie-in, connect the opposite finish of the pressure measuring hose to the pressure connector, user can perform pressure detection.
【A Complete Set:】 : That is a correct hydraulic pressure checking out set, Come with: 3 pressure gauge, 3 connect tube, 10 couplings and 1 Fast Unlock coupling. It may give dependable pressure measuring results, really easy to attach and use. Stainless-steel couplings, anti-rust, leakage-evidence and higher than the ones aluminum merchandise on market.
【Specification:】Come with 3 pressure gauge ranges: zero-25Mpa, zero-40Mpa, zero-60Mpa;10 Stainless-steel Check couplings: G 1/four, Z 1/four,G 3/8, G 1/8, M 10*1, M 10*1.25, M 1/8, M14*1.5, 7/sixteen, nine/sixteen.
【Actual:】G1/8 Fast connector compatible for Caterpillar machines;Actual gauge set, dependable results.
【Appropriate for】: Appropriate for so much excavator and machine on market;Transportable to hold with aluminum case.
【Wide Application】: Check tube connects the gauge for direct studying;Wear-resistant tube, have an effect on-resistant with just right elasticity;Broadly used at building, equipment, shipping, mining, petroleum, chemical trade and so on.