The Dake B-10 fashion guide utility hydraulic bench press uses a single-speed hydraulic handpump to decrease the ram with as much as 10 heaps of pressure to facilitate pressing and forming. The channel iron H-frame accepts massive and hulking pieces, and the hoist adjusts the table height for right kind positioning. The workhead is movable to adjustment for off-heart pressing. The hydraulic cylinder and pump care for may also be located on both sides of The clicking to maximise workspace and luxury. The discharge valve turns to Free up the hydraulic power, initiating ram go back after downstroke. Last the valve at any point throughout the ram go back will halt the ram.
Two interchangeable ram noses are included: a flat nose piece to be used in usual pressing operations and a step-reduced nose piece for helping, positioning, or fitting into pieces while pressing. The 2 table plates supply improve throughout pressing. The clicking has a gauge with a 2-1/2″-dia. show for power readings. The bottom has four 7/sixteen”-dia. holes for bench mounting. Mounting hardware isn’t included. Hydraulic oil isn’t included. Press requires a few assembly.
|Load capacity||10 tons|
|Max. operating height||16 inches|
|Min. operating height||4 inches|
|Ram travel||6 inches|
|Table dimensions||16-3/four x 3 inches (W x L)|
|Press overall dimensions||36 x 23 x 18 inches (H x W x L)|
H is height, the vertical distance from the lowest to absolute best point of The clicking; W is width, the horizontal distance from left to proper; L is period, the horizontal distance from entrance to back.
Hydraulic presses use fluid power to transmit a compressive pressure, which stays constant all through the period of the ram’s stroke. Steel forming is one commonplace use of a hydraulic press.
Dake Machine Equipment manufactures arbor presses, hydraulic presses, drill presses, energy hammers, band and cold saws, belt grinders, tube benders, and auto feed programs. The corporate, based in 1887, is headquartered in Grand Haven, MI.
What’s within the Box?
- Dake B-10 press
- Flat ram nose
- Step-reduced ram nose
- (2) Table plates
Single-speed hydraulic handpump lowers the ram of the bench-mount press with as much as 10 heaps of pressure
Adjustable-height table throughout the H-frame allows right kind positioning of enormous and hulking pieces
Movable workhead facilitates off-heart pressing
Free up valve initiates and controls ram go back after downstroke
Features a flat ram nose, a discounted-step nose, and two table plates for actual pressing and improve